TAIGTurn CNC Lathe

TAIGTurn LATHES

X-Axis Hard Anodized Table with Steel Ways and a tapered Gib and Z-axis with square Steel ways

Hardened ER16 Spindle in Headstock for superior accuracy

Hardened 5C Spindle in Headstock for superior accuracy

The TAIGTurn 4029 CNC Lathe is a top of the line desktop CNC lathe. It is a very rigid and precise machine that uses some of the most advanced techniques that allows it to produce parts that used to be done on machines that cost thousands of dollars more. With a rapid feed of up to 100 inches per minute you can go from tool to tool in just seconds.

A key feature of the DSLS equiped (Full CNC Package) CNC Lathe is the ability to single point thread. This is accomplished using a "Digital Index Signal Processor" which was designed by Microproto Systems. Please note, this is a feature not included with "CR" series TAIGTurn Lathes.

The main frame consists of a 2 1/2 inch square steel tubing to provide a very solid feel. The leadscrews are all 1/2-20 or 12mm x 2.5mm Ball Screws unlike a lot of machines of similar size that use 1/4 inch leadscrews. The moving slides ride on Ground Steel Ways with full gib adjustments for wear as the years of use go by. Overall working accuracy should exceed .0005 with Leadscrews or .0002 with Ball Screws. All machines are sold with a 14 day refund and a full 2 year factory warranty on all Lathe components and accessories.


Ramblin' Dan’s Store (RDS) does not stock the TaigTurn Lathes or Accessories in local inventory. All machines and accessories are dropped shipped directly from the Taig Tools factory in Chandler, Arizona, USA. You will be receiving the latest factory fresh production.

Please note:  Machine orders are transferred to Taig within 24 hours of receipt at RDS. Fullfillment and shipping from Taig is variable and can be 7 to 10 days to ship plus travel time. Some orders ship much faster. This lag is beyond control of RDS. Taig generally does NOT provide order tracking. RDS can determine when product ships from a billing notice.


LATHE SPECIFICATIONS

GENERAL

 

  • Height 14"
  • Width 24"
  • Depth 31"
  • Weight 80 lbs (with ER Headstock)
  • Weight 90 lbs (with 5C Headstock)
  • Maximum spindle runout 0.0003 in. (ER16)
  • Maximum spindle runout 0.0002 in. (5C)
  • X axis dovetails 45 deg.
  • Z axis dovetails 90 deg.
  • Leadscrews are 1/2"-20 on X & Z
  • Ball Screws are 12mm x 2.5mm on X & Z
  • All lead screw drives have friction adjustable micrometer dials in .001 inch increments
  • Pulley type std. 5/8 in. bore multi-step belt (ER).
  • Pulley type std. 1 5/8 in. bore multi-step belt (5C).
  • Construction - Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.

 

CAPACITY

 

  • Travel in X axis 12 in.
  • Travel in Z axis 6 in.
  • Max Rapid travel per axis 75 in/min (Leadscrew)
  • Max Rapid travel per axis 100 in/min (Ball screw)
  • Table dimensions 3 1/2 x 18.4 inches
  • 4 spindle speeds 435-1800 RPM

 

SPINDLE (ER16 SPINDLE)

 

  • Spindle Runout less than .0003
  • Sealed precision ball bearing
  • Bearing OD 1.5748 in., ID 0.6692 in.
  • Spindle nose 22mm X 1.5mm
  • Spindle hole 0.406 in.
  • Spindle ID taper 8 deg (16 deg included)
  • Max. collet diameter 3/8 in.
  • Pulley size 5/8 in. bore.
  • Ball Bearings in all leadscrew bearing blocks

 

SPINDLE (5C SPINDLE)

 

  • Spindle Runout less than .0002
  • Sealed precision ball bearing
  • Bearing OD 2.9528 in., ID 1.7717 in.
  • Spindle hole 1 3/16 in.
  • Spindle ID taper 10 deg (20 deg included)
  • Max. collet diameter 1 1/16 in.
  • Pulley size 1.625 in. bore.
  • Ball Bearings in all leadscrew bearing blocks

 


Who's Online

There currently are 7 guests online.
Your IP Address is: 54.80.169.119
Copyright © 2017 Ramblin' Dan's Store. Powered by Zen Cart