Taig Micro Mill

MICRO MILL

BallScrews are now available on the 2019CR (#5019CR) and the 2027CNC (#5027ER)

X-Axis Hard Anodized Table with tapered Gib and Y-axis with square Steel ways

Hardened ER16 Spindle in Mill Head for superior accuracy

Z-Axis Slide with tapered Gib and Steel Box Ways

The Micro Mill is a very rigid and precise machine that uses some of the most advanced techniques compared to its competitors. The Y-axis and Z-axis are supported on 2 1/2 inch square steel tubing to provide a very solid feel. The leadscrews are all 1/2-20 unlike a lot of machines of similar size that use 1/4 inch leadscrews. TAIG prefers to provide added mechanical features to allow the mill to be more useful without raising the price. Being an aerospace manufacturer for over 18 years our machinists know the importance of table back-lash compensation and full gib adjustments for wear as employed in the manufacture of the Micro Mill. Basically, the Micro Mill was designed by machinists and built by machinists. Overall working accuracy should exceed .0005 in. All machines are sold with a 14 day refund and a full 2 year factory warranty on all Mill components and accessories.

The Micro Mill has effortless, chatterless, table and millhead movement due to the unique design of oversized gibs, ground 'Y' axis steel ways, and a massive carriage assembly. The ground steel ways on the vertical mill head support provides a very rigid Z-axis and makes the Micro Mill ready for CNC upgrade if you desire. Our small Mill is really a scaled down version of a big Mill with manual operation.

This is the machine you don't have to baby. The Micro Mill is a rugged precision instrument that has plenty of rigidity. It has a life-time ball bearing spindle, coupled with a six speed positive vee belt drive. Spindle speeds in geometric progression from 525-5200 RPM (CR version 1000 - 10000 rpm) provide the power to "HOG" 1/8 inch cuts in mild steel or the speed and precision to "dust" a few tenths (compare that to other mills of similar size on the market, you can't!).

Other big Mill features include large .001 inch graduations on friction adjustable micrometer dials for the X,Y,& Z axis. Adjustable gibs provide full compensation for X,Y & Z axis wear. The spindle head column can rotate from 0 to 180 degrees to provide for special machining tasks. All this adds up to a BEST VALUE in small Mills.


Ramblin' Dan’s Store (RDS) does not stock the Micro Lathe II in local inventory. All Micro Lathes are dropped shipped directly from the Taig Tools factory in Chandler, Arizona, USA. You will be receiving the latest factory fresh production.

Please note:  Machine orders are transferred to Taig within 24 hours of receipt at RDS. Fullfillment and shipping from Taig is variable and can be 7 to 10 days to ship plus travel time. Some orders ship much faster. This lag is beyond control of RDS.


SPECIFICATIONS

GENERAL

  • Height 21-3/8 in (manual) 26-3/8 in (CNC)
  • Width 17 in (manual) 22 in (CNC)
  • Depth 16-3/4 in (manual) 21 in (CNC)
  • Weight 65 lbs (manual) 85 lbs (CNC)
  • Maximum bearing runout 0.0004 in.
  • X axis dovetails 45 deg.
  • Y axis dovetails 90 deg.
  • Z axis steel box ways
  • 1/2"-20 leadscrews on X,Y,& Z
  • All lead screw drives have friction adjustable micrometer dials in .001 inch increments
  • Pulley type std. 5/8 in. bore multi-step vee belt.
  • Construction - Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.

CAPACITY

  • Travel in X axis 9.5 in. (Model 2018)
  • Travel in X axis 12 in. (Model 2019)
  • Travel in Y axis 5.5 in
  • Travel in Z axis 6.0 in
  • Table dimensions 3 1/2 x 15 1/2 inches (Model 2018)
  • Table dimensions 3 1/2 x 18.4 inches (Model 2019)
  • Maximum Z-distance to table 9.0 in
  • Z-Axis swivel 90 degrees
  • 6 spindle speeds 525-5200 RPM
  • 6 spindle speeds 1000-10000 RPM (CR mill)
  • Z axis column rotation up to 180 degrees
  • Spindle head rotation 90 degrees

SPINDLE (ER16 SPINDLE)

  • Spindle Runout less than .0003
  • Max spindle speed 10000 RPM
  • Sealed precision ball bearing
  • Bearing OD 1.5748 in., ID 0.6692 in.
  • Spindle nose 22mm X 1.5mm
  • Spindle hole 0.406 in.
  • Spindle ID taper 8 deg (16 deg included)
  • Max. collet diameter 3/8 in.
  • Pulley size 5/8 in. bore.
  • Ball Bearings in all leadscrew bearing blocks
Taig CNC Micro Mill 5027ER
5027ER

Taig CNC Micro Mill 5027ER

5027ER (2027CNC) Micro Mill with BallScrews on each axis with Nema 23 motor mounts, stepper motors , control system. and MACH3 software. NOTE:...
$2,695.50
Add:
Taig Micro Mill 2018CR-ER
2018CR-ER

Taig Micro Mill 2018CR-ER

2018CR-ER - Is a 2018ER converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Does...
$1,012.50
Add:
Taig Micro Mill 2018ER
2018ER

Taig Micro Mill 2018ER

Taig Micro Mill 2018ER factory assembled (3 1/2 x 15 3/4 inch table and 9 inches of travel in 'X' wired up and ready to go, way covers not...
$751.86
... more info
Taig Micro Mill 2019CR-ER
2019CR-ER

Taig Micro Mill 2019CR-ER

2019CR-ER - Is a 2019ER converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Does...
$1,090.00
Add:
Taig Micro Mill 2019ER
2019ER

Taig Micro Mill 2019ER

2019ER Micro Mill factory assembled (3 1/2 x 18 1/2 inch table and 12 inches of travel in 'X' wired up and ready to go, way covers not...
$873.00
... more info
Taig Micro Mill 5019CR-ER
5019CR-ER

Taig Micro Mill 5019CR-ER

5019CR-ER - Micro Mill with BallScrews on each axis and converted to CNC ready with Nema 23 motor mounts, and upgraded 1/4 horse power motor . Does...
$1,665.00
Add:
Taig XY Stage (only) 2018CR-XY
2018CR-XY Stage

Taig XY Stage (only) 2018CR-XY

2018CR-XY STAGE Manual with Nema 23 motor mounts. (3 1/2 x 15 3/4 inch table and 9 inches of travel in 'X') This is the XY axis...
$483.00
Add:
Taig XY Stage (only) 2018XY
2018XY

Taig XY Stage (only) 2018XY

2018XY STAGE Manual with Hand Cranks. (3 1/2 x 15 3/4 inch table and 9 inches of travel in 'X') This is the XY axis "stage"...
$410.18
Add:
Taig XY Stage (only) 2019CR-XY
2019CR-XY Stage

Taig XY Stage (only) 2019CR-XY

2019CR-XY STAGE Manual with Nema 23 motor mounts. (3 1/2 x 18 1/2 inch table and 12 inches of travel in 'X') This is the XY axis...
$539.55
Add:
Taig XY Stage (only) 2019XY
2019XY

Taig XY Stage (only) 2019XY

2019XY STAGE Manual with Hand Cranks. (3 1/2 x 18 1/2 inch table and 12 inches of travel in 'X') This is the XY axis "stage"...
$489.92
Add:

Who's Online

There currently are 2 guests online.
Your IP Address is: 54.224.109.48
Copyright © 2017 Ramblin' Dan's Store. Powered by Zen Cart