Taig Micro Lathe II

The MicroLathe II is a machine you don't have to baby. It is a rugged and precision machine. The MicroLathe II has a machined, ground and stabilized steel bed. It has two sealed ball bearings in its spindle, coupled with a six speed positive vee belt drive. The spindle speeds are set in a geometric progression from 525 to 5200 RPM. A precision machine with the capabilities to 'HOG' 1/8 inch cuts in mild steel yet 'Dust' a few tenths, make the MicroLathe II a very versatile machine.

Some big lathe features include large 0.001 inch graduations on the cross slide dial, adjustable tool post and carriage depth stop. With adjustable brass gibs providing full compensation for carriage and cross slide wear, it all adds up to the BEST VALUE in small lathes!


Ramblin' Dan’s Store (RDS) does not stock the Taig Micro Mill in local inventory. All Micro Mills are dropped shipped directly from the Taig Tools factory in Chandler, Arizona, USA. You will be receiving the latest factory fresh production.

Please note:  Machine orders are transferred to Taig within 24 hours of receipt at RDS. Fullfillment and shipping from Taig is variable and can be 7 to 10 days to ship plus travel time. Some orders ship much faster. This lag is beyond control of RDS.


SPECIFICATIONS

GENERAL

  • Overall working accuracy 0.0005 in.
  • Max. headstock normality to bed 0.0004 in.
  • Max. taper bed dovetails over pins 0.0001 in.
  • Cross slide screw 1/4 - 20
  • Max. spindle speed recommended 7000 RPM
  • Length of headstock on ways 2.625 in.
  • Width of cross slide on carriage 2.000 in.
  • Maximum bearing runout 0.0004 in.
  • Max.cross slide normality to bed 0.0004 in.
  • Cross slide dial graduation 0.001 in.
  • Carriage travel 0.600 in. per 1 rev. of handwheel.
  • Pulley type std. 5/8 in. bore multi-stop vee belt.
  • Length of carriage on ways 3.000 in.
  • Bed dovetails 45 deg.

CAPACITY

  • Max. turning dia. 4.5 in. (extendable to 6.5 in.)
  • Swing over cross slide 2.375 in.
  • Overall length of bed 15.5 in.
  • Overall length of lathe 16.5 in.
  • Tool bit size standard 1/4 in.
  • Drill chuck capacity 1/4 in.
  • Distance between centers 9.75 in. (with tailstock).
  • Carriage travel 9.0 in.
  • Cross slide travel 1.75 in.

SPINDLE

  • Sealed precision ball bearing
  • Bearing OD 1.5748 in., ID 0.6692 in.
  • Spindle nose 3/4 in. - 16 (3/4 in. SAE)
  • Spindle hole 0.343 in.
  • Spindle ID taper 15 deg (30 deg included)
  • Max. collect diameter 9/32 in.
  • Pulley size 5/8 inch bore.
Taig Micro Lathe II K1019
K1019

Taig Micro Lathe II K1019

K1019 - Unassembled Micro Lathe II kit, headstock pre-assembled, no machining necessary (Pulleys and tailstock not included) 15" bed. NOTE: ...
$157.77
Add:
Taig Micro Lathe II L1015
L1015

Taig Micro Lathe II L1015

L1015 - Micro Lathe II basic unit with automatic power feed, factory assembled with tool post and carriage depth stop, pulley set, mounting board and...
$294.39
Add:
Taig Micro Lathe II L1017
L1017

Taig Micro Lathe II L1017

L1017 - Micro Lathe II basic unit, factory assembled with tool post and carriage depth stop (Pulleys and tailstock not included) 15" bed. NOTE:...
$192.69
Add:
Taig Micro Lathe II L1017ER
L1017ER

Taig Micro Lathe II L1017ER

L1017ER - Micro Lathe II basic unit, factory assembled with Hardened ER16 Spindle, tool post and carriage depth stop (Pulleys and tailstock not...
$234.00
Add:
Taig Micro Lathe II Package #1 (1017-1)
1017-1

Taig Micro Lathe II Package #1 (1017-1)

Taig MicroLathe II Starter package #1 (1017-1) 1017 Micro lathe assembled unit  1050 3 jaw self centering chuck 1095 6 piece tool bit...
$444.20
... more info
Taig Micro Lathe II Package #1 (1017-1ER)
1017-1ER

Taig Micro Lathe II Package #1 (1017-1ER)

Taig MicroLathe II Starter package #1 (1017-1ER ) 1017ER Micro lathe assembled unit  1050ER 3 jaw self centering chuck 1095 6 piece tool...
$497.10
... more info
Taig Micro Lathe II Package #2 (1017-2)
1017-2

Taig Micro Lathe II Package #2 (1017-2)

Taig MicroLathe II Starter package #2 (1017-2) 1017 Micro lathe assembled unit  1050 3 jaw self centering chuck 1091 0 to 1/4 inch...
$465.60
... more info
Taig Micro Lathe II Package #2 (1017-2ER)
1017-2ER

Taig Micro Lathe II Package #2 (1017-2ER)

Taig MicroLathe II Starter package #2 (1017-2ER ) 1017ER Micro lathe assembled unit  1050ER 3 jaw self centering chuck 1091 0 to 1/4...
$518.45
... more info
Taig Micro Lathe II Package #3 (1017-3)
1017-3

Taig Micro Lathe II Package #3 (1017-3)

Taig MicroLathe II Starter package #3 (1017-3) Just about everything you will need. 1017 Micro lathe assembled unit  1040 Collet set...
$528.60
... more info
Taig Micro Lathe II Package #3 (1017-3ER)
1017-3ER

Taig Micro Lathe II Package #3 (1017-3ER)

Taig MicroLathe II Starter package #3 (1017-3ER ) Just about everything you will need. 1017ER Micro lathe assembled unit  1040ER...
$581.35
... more info

Who's Online

There currently are 3 guests online.
Your IP Address is: 54.167.225.62
Copyright © 2017 Ramblin' Dan's Store. Powered by Zen Cart